←Top

Toolbars


This section describes the individual toolbars of MorphRush.

Changing edit mode between pass and mask

Pass edit

Adds, moves, and deletes passes.

Adding pass:

Left-click the mouse at the position where you desire to set a pass in order to set a pass point there.
Move the cursor and left-click the mouse again to set passes linked by a line.
Repeat the above steps to set a pass shape.
Click on a point or a line that is already set to finish the series of pass setting.
To finish at the current pass point, left-click the mouse again without moving it.

To link a pass to a point or a line that is already set, left-click on that point or that line.

Moving pass:

Left-click on a point or a line you desire to move and drag it while holding the left button of the mouse.

Deleting pass:

To delete a pass, right-click on the point you desire to delete.
To delete a line between points, right-click on the line you desire to delete.

Batch pass selection/Freehand

Enclose pass points by freehand to specify them in batch.
While holding the mouse left button, move the mouse to describe a freehand line along the cursor track.
When the mouse button is released, all the points enclosed by the line are selected.
If the specified line is not a loop, the start point and the end point are linked by a straight line so as to make a loop.
If the above process is repeated with Adding set in the option bar, new passes are selected in addition to the already selected passes.
Operate the mouse while holding the Control key to temporarily change the Adding setting.
To move multiple selected points at once, drag any arbitrary point in the selected points.
To delete multiple selected points at once, right-click on any arbitrary point in the selected points.

Batch pass selection/Group

Specifies all the passes that link to the selected pass in batch.

Use the above mentioned freehand steps for adding, batch moving, and deletion.

Mask edit/Freehand

Specifies a mask area by freehand.

While holding the left mouse button, move the mouse to paint the area with the set color and transparency.
This painted area becomes the mask area.
If Clear is set in the option bar, the above operation causes the painted part to return to the ordinary image and the mask to be canceled.
The pen size can be changed according to the area to be specified.

Mask edit/Fill color

Fills the mask area with a color.

If the position where the mouse left button is clicked is not a mask area, masks are added to all the areas with no mask specified that come in contact with the clicked position.
If Clear is set in the option bar and the clicked position is a mask area, then the masks in the mask-specified areas that come in contact with the clicked position are deleted.

Mask edit/Filling pass area with color

Fills a mask area with a color using the pass line as the border.

Left-click the mouse to add a mask to the clicked area within the pass line.
If Clear is set in the option bar, clicking causes the mask to be deleted from the clicked area within the pass line.

Adjusting image display size

Enlarge and reduce the display scale of the currently edited image.

Enlarge or reduce the image size so that the mouse cursor is placed in the center of the window.
If Enlarge is set in the option bar, click the mouse left button to enlarge and the mouse right button to reduce.
If Reduce is set in the option bar, click the mouse left button to reduce and the mouse right button to enlarge.
If the Control key is held when the mouse left button is clicked, the above behaviors are reversed.

Operation of option bar in each edit mode

Pass edit

Since all the operations are executed by use of the mouse cursor on the image, this mode has no item to operate.

Batch pass selection/Freehand

Operations include adjustment of pass shape that is selected in batch.

Adding

Pass selection is cleared by each mouse operation. If Adding is set, however, the previously selected pass is not cleared but the newly selected pass is added.

Reverse

Reverses the pass selection condition.

Deformation

Displays the guide on the image that is used to change the shape of the selected pass.
Maneuver the guide with the mouse to move, expand, shrink, and rotate the pass shape.

Clear all

Clears all the pass selection.

Batch pass selection/Group

Operations are the same as those of the above-mentioned freehand.

Mask edit/Freehand

Changes the mask to be edited (fixation/outline) and switches the mode between adding and deletion.

Changing mask color and size

Displays the operation panel used to change the mask color and the pen size.

Fixation/Outline

Changes the mask to be edited (fixation/outline).

Clear

Specify Clear to delete the mask that is being set by mouse operation.

Clear All

Clears all the mask areas that are being set.

Undo

Cancels the last operation to return to the previous condition.

Mask edit/Fill color

Operations are the same as those of the above-mentioned freehand.

Mask edit/Filling pass area with color

Operations are the same as those of the above-mentioned freehand.

Adjusting image display size

Enlarge and reduce

Left-click on the image to specify whether the image is enlarge or reduce.

Rendering


Buttons have been prepared that have the same functions of rendering in the menu items.

Parameter setting

Displays the Parameter setting window to set the parameter values that are referred to at the time of rendering.

Movie preview

Displays the preview window to replay the movie that is created by rendering.

Run

Executes rendering and creates a morphed movie.
During rendering, the button color changes from green to red.